The Solar Hot Water System
Tank Level Display Probe

• The Tank Probe is mounted vertically in the water tank to sense the liquid level coming through from the Mains valve. Manufactured from reinforced phenolic resin and 316 Stainless Steel, it affords maximum resistance to corrosion.

The total sensing current flowing in the Probe Electrodes is less than 50 micro amps, and will not cause measurable electrolytic corrosion in the metallic fittings. The Probe has been designed to withstand water at atmospheric pressure at a maximum Temperature of 210F.

The standard probe measures 5’-0” or (1530cm) in length. Five sensors are fitted, equally spaced from the Tank bottom. Five green LED lights on the readout unit correspond to the five sensors, one single red LED light indicates “TANK EMPTY”.

The wall-mounted Readout box measures 65mm x 135mm x 40mm (WxHxD) and weighs 120g. Two sockets are provided on the bottom of the Readout, one to connect to the Tank Probe, and the other for low voltage power.

The system is typically powered by a “plug-Pac 12-VDC supply, or as for use Overseas the Probe can be connected to a transformer system.

• The Probe can also be used to run off a 12-volt car battery. A “low current drain” Readout is available for such applications, extending battery life without sacrificing LED brightness.

• The gauge weight is 2.8kg (6lb+).
Dimensions are 160cm long (63"), 65cm across the top (25"), 12cm diameter along the length (4.75").

click to enlarge the photo    

• A fully solar powered system is also available for powerless areas.

• Tank Probes can be made to order to meet non-standard requirements.

• We offer a twelve month warranty on all equipment, acts of God such as lightning strike excluded.

Price is ($AUD) $1,070.00 (self install)
+ shipping and crating

Water is scarce and we cannot live without it! .... Be conscious of our precious water.