
Bluey’s Rainwater Tank Gauges
The Electronic Probe System Gauge
• Convenient user friendly ‘readout unit’ of
water level in tank can be positioned up to 50m away from the
tank for
example inside the kitchen, garage or a place of your convenience.
• No moving parts or switches - minimal maintenance.
• Probes suit drinking or wastewater tanks.
• Designed and manufactured in Australia with maximum use of Australian
parts from stabilized PVC and stainless steel.
• Tank probe interface has electrical surge protection.
• Probe can be mounted vertically in water either on the side
of the tank, or attached to inlet pipe.
• The Probe also has five sensors equally spaced
with a standard height of 2.2 metres. Five green LED lights on
the readout unit
correspond to the five sensors. One red LED light indicates “empty”.
• The
readout unit has two sockets - one to connect the probe cable, the
other for low 12volt power.
• Standard cable length is 10 meters; extensions
are available from 5m to 40m. Maximum distance is 50 metres from
power supply.
• Readout unit must be within 1metre of a power point,
but where that is not possible; a 12volt car battery can run the
system with low-current drain readout. |